IP ADDRESS FOR NETGEAR ROUTER WGR614V9 MANUAL

IP ADDRESS FOR NETGEAR ROUTER WGR614V9 MANUAL

Please consult the manual and/or the Netgear Support Pages if you get stuck in any of the above steps. Separate the devices to the edge of their wireless ranges.Configure the WGR614 to the same security level and settings as the router, including the access control list.Configure different wireless channels on each device (use the non-overlapping channels 1, 6 and 11 to avoid interference).Configure the SSID on the router and the access point so that they are the same.Connect the router to any of the available LAN ports of the WGR614 using a network cable.

Change the IP address of the WGR614 to something else than the IP address of the router.Log on to the WGR614 via your web browser (usually 192.168.0.1 or similar – check the manual for correct address and default logon credentials).Connect your laptop or PC to any of the LAN ports of the WGR614 using a network cable.Make sure your laptop or PC used in the following steps is not connected to the network.Make sure there are no network cables attached to the WGR614 (neither LAN nor WAN).Several access points can be used to extend the range even further. As such, it will contribute to extending the range of the wireless segment of the same LAN or – if the router used does not have WLAN capability – will add WLAN capability to the network. The Netgear WGR614 is a popular and inexpensive 54MBit/s wireless router that can be tweaked to be used as a wireless access point on a threaded LAN.

Ip address for netgear router wgr614v9